How To Disassemble Dell Latitude D610
Wednesday, 25 September 2013How To Disassemble
Dell
Latitude D610
Step 1: Remove the Battery
To remove the battery from your Laptop, unscrew 1 screw and pull the battery lock outwards. The battery will immediately be lifted up.
Step 2: Remove the Hard disk
This step is necessary. However, Hard Disk is very sensitive Device that is use for store data. we remove hard disk when Disassemble Laptop.Step 2 : Remove The Hinge Cover
For starters dismantling the pivot spread might dependably be a
test. Be that as it may as you get used to dismantling your portable computer,
this comes to be as simple as consuming peanuts.
1. Open your LCD screen the extent that this would be possible,
the distance to 180 degrees.
2. Use your level cutting edge screwdriver to pry open the pivot
blanket from the right side.
3. Carefully unsnap the pivot blanket beginning from the right
side.
You will hear a couple
of popping clamors demonstrating that the pivot spread is disengaged from the
base. Step 3 : Remove The Keyboard
After your hinge cover is off, you
will have admittance to the screws securing the console.
1. Remove two M2.5 x 5-mm screws found
at the highest point of the smart phone.
2. Slowly lift up the console
(determine you don't snap the link underneath).
Determine you have enough space for
your hand to go beneath the console, then disengage the link by pulling the
blue tag.
0 comments:
Post a Comment